|
|
|
|
|
|
Wire Gauze 4" x 4"
|
|
|
Double gauze wire used to support glassware above flame. Made of woven iron wire with turned edges to prevent fraying.
|
|
|
|
|
|
|
|
|
|
Wire Gauze 4" x 4" w/Ceramic Insert
|
|
|
Double gauze wire used to support glassware above flame. Made of woven iron wire with turned edges to prevent fraying.
|
|
|
|
|
|
|
|
|
|
Funnel Holder
|
|
|
Made of polypropylene, these corrosion free funnel holds van hold funnels with diameters 3" to 6". The extra plate provided can be placed to hold funnels having diameter 1" to 3". Two tapered wedges are provided to ensure firm grip on rods measuring 1/2" to 3/8" diameter.
|
|
|
|
|
|
|
|
|
|
Separatory Funnel Holder
|
|
|
This non-corrosive separatory funnel holder, molded in polypropylene, has a front opening which provides clear view of the solution and allows unobstructed placement of separating funnels. Two tapered wedges are provided to ensure firm grip on rods measuring 1/2" or 3/8" diameter.
|
|
|
|
|
|
|
|
|
|
Support Ring
|
|
|
Made from zinc plated steel. This clamps will fit onto support rods up to 1/2� in diameter.
|
|
|
|
|
|
|
|
|
|
Laboratory Safety Mat 9" x 9"
|
|
|
9" x 9" Non-slip, heat resistant silicone-rubber mats with a temperature resistance from -75 to 500 degrees F. Textured surface to prevent spills.
|
|
|
|
|
|
|
|
|
|
Laboratory Scissor Jack - Stainless 6" x 6"
|
|
|
Designed for supporting glassware and other lab items at a stable and precise height, the scissor jacks extend to a maximum height of 10"
|
|
|
|
|
|
|
|
|
|
United Scientific Laboratory Scissor Jack 4" x 4"
|
|
|
United's laboratory support jacks are constructed of painted aluminum and stainless steel. The scissor jack design enables height adjustment with a simple turn of the knob.
4" x 4" platform that can be vertically adjusted from a closed position of 2.5" up to 6". Maximum load capacity is 10kg.
Email a question about this item
|
|
|
|
|
|
|
|
|
|
United Scientific Laboratory Scissor Jack 6" x 6"
|
|
|
United's laboratory support jacks are constructed of painted aluminum and stainless steel. The scissor jack design enables height adjustment with a simple turn of the knob.
6" x 6" platform that can be vertically adjusted from a closed position of 3" up to 10". Maximum load capacity is 20kg.
Email a question about this item
|
|
|
|
|
|
|
|
|
|
Laboratory Jack with Platform and Rod
|
|
|
Laboratory support jack is constructed of chemically resistant anodized
aluminum and stainless steel. The scissor jack design enables height
adjustments with a simple turn of the knob. Sturdy design can support
loads up to 100 lbs.
|
|
|
|
