|
|
|
|
|
|
5' High Vaccum Pump Tubing with two hose clamps
|
|
|
5' Length of reinforced High Vacuum Tubing with an ID of 1/2". Can withstand vacuum of up to 25 microns.
|
|
|
|
|
|
|
|
|
|
Glass Bell Jar with Knob - 5" x 9"
|
|
|
Glass Bell Jar - 5" x 9" with glass top knob for handling.. Glass Bell jar for use in pressure/vacuum experimentation or work. Requires vacuum plate and pump to work.
|
|
|
|
|
|
|
|
|
|
Acrylic High Vacuum Pump Plate
|
|
|
Acrylic High Vacuum Pump Plate
High quality acrylic pump plate. For use with our Bell Jar and Vacuum Pump for air pressure experimentation.
|
|
|
|
|
|
|
|
|
|
Glass Bell Jar with Knob - 6" x 11"
|
|
|
Glass Bell Jar - 6" x 11". Glass Bell jar for use in pressure/vacuum experimentation or work. Requires vacuum plate and pump to work.
|
|
|
|
|
|
|
|
|
|
Case of High Vacuum Pump Oil, 12 Quarts
|
|
|
Case of High Vacuum Pump Oil, 12 quarts total. Especially made for Fischer High Vacuum Pumps.
|
|
|
|
|
|
|
|
|
|
Pressure Regulator Kit Assembly for PILOT Vacuum Pumps
|
|
|
Pressure Regulator Kit Assembly:
Includes:
- Dial Pressure gauge
- Hand Knob Control
- 1/4" O.D. hose barb
- 1/8" NPT Exhaust Adapter
- Built in Silencer
Email a question about this item
|
|
|
|
|
|
|
|
|
|
Glass Bell Jar with Knob - 8-1/2" x 15"
|
|
|
Glass Bell Jar - 8-/12" x 15" with glass top knob for handling.
|
|
|
|
|
|
|
|
|
|
Cast Iron High Vacuum Pump Plate
|
|
|
The Fischer Technical high vacuum pump plate is made of cast iron and accommodates bells jars up to 9" in diameter. The plate is 1/2 inch thick and nickel plated for corrosion resistance. The hose barb is 3/8". Pump plate comes with an attached vacuum release valve and rubber gasket for a tight seal.
|
|
|
|
|
|
|
|
|
|
2-Stage Laboratory Vacuum Pump
|
|
|
This two stage vacuum pump is CE approved and comes ready to operate. With an easy to carry design, it is smaller, lighter and more portable.
|
|
|
|
|
|
|
|
|
|
PILOT3000 Chemical Resistant Diaphragm Vacuum Pump
|
|
|
The PILOT3000 economical chemical-resistant diaphragm vacuum pump is constructed from quality parts, manufactured in the USA, and offered at an affordable price. This Laboratory Vacuum pump is library-quiet - the noise level is only ~54 dB, small, durable, and chemical resistant! The PILOT3000 is nearly maintenance-free because of the PTFE coated surface. PTFE membrane, stainless steel valves, and oil-free design. The pump features a vacuum coated regulator with gauge to adjust and monitor vacuum level. The PILOT3000 is a 20 psi continuous duty pump.
Email a question about this item
|
|
|
|
